Hybrid Wood-Pellet Thermo Stove BI-FIRE MID – Klover

HIGH HEAT OUTPUT TO THE SYSTEM. The full utilization of the flame and exhaust gases through the unique smoke circuit ensures maximum heat transfer to the water in the heating system.

TOTAL COMPATIBILITY. The Bi-Fire Mid hydro stove is compatible with any boiler, including wall-mounted gas boilers.

EASY TO INSTALL. All the hydraulic components needed for proper installation are pre-installed on the stove, so no technical compartment is required. The hydro stove is compatible with any boiler, including wall-mounted models. In the event of a power outage, the fire automatically extinguishes. By lifting the majolica top, placed on the upper surface, you can check the system pressure using the pressure gauge and vent air from the boiler body using the dedicated vent valve. The side smoke circuit can be fully cleaned by operating the two side knobs.

EASY TO CLEAN. Cleaning the smoke circuit is simple and quick. By manually operating the two side knobs, you can clean the lateral smoke passage. All the ash falls to the base and is easily accessible by opening the two cleaning hatches located under the smoke circuit.

ALL-INCLUSIVE. The standard equipment includes: “SICURO top” system, electronic control unit, system circulator, recirculation pump, closed expansion tank, safety valve, water pressure gauge, air vent valve, check valve, boiler drain tap, safety thermostat, flue pressure switch, sealed combustion chamber, “Double combustion system”, “Clean glass system”, automatic flue control on the wood side, thermostatic valve for wood combustion air, adjustable feet.

TWO-IN-ONE. Two completely separate combustion chambers, one for pellets and one for wood, ensure maximum utilization of the flame and exhaust gases. This is why Bi-Fire Mid achieves high efficiency with extremely low emissions. A single flue allows for installation in any environment without complicated masonry work.

WOOD MEETS PELLETS. Bi-Fire Mid can operate on pellets only, wood only, wood with the option to automatically ignite pellets as soon as the boiler water temperature drops, or both wood and pellets simultaneously. The weekly programmer allows automatic pellet ignition up to 4 times a day for the entire week. The large pellet tank (48 kg) ensures excellent autonomy with long intervals between refills.

EASY TO LOAD WOOD. Loading wood into the Bi-Fire Mid is easy and quick, as the fire chamber door is conveniently positioned and high enough to make the operation accessible to everyone. The Bi-Fire Mid is also equipped with a special smoke control damper on the wood side that automatically opens whenever wood is loaded, preventing any smoke from escaping during the process.

OPTIMAL COMBUSTION. Pellet combustion is “controlled” by the electronic control unit, ensuring the right supply of combustion air. To achieve the same result with wood, the Bi-Fire Mid features a special thermostatic valve that gradually closes the air intake as the temperature level set with the dedicated handle is reached.

RECIRCULATION PUMP. To maximize the heat exchange between the generated heat, the system water, and the domestic hot water, the Bi-Fire Mid is equipped with a recirculation pump. This optimizes the heat transfer between fumes and water, preventing the risk of condensation formation.